white oyama for tank bottom

hello guys

i have a problem and need some advice

i have a 422 tank with black oyama on back and bottom.
i wanted to remove the white sand as too much dirt and the pump/filter can't keep up.

can i stick white oyama inside the tank and make it white? it oyama toxic?

thanks

[Vitor]

You can try while acrylic too. Another option

I got a ivory cream oyama if u want, can let u have it cheap , etc a ayatata green tea 1.5L

Size got for a 622 base

Haha

[Vitor]

Btw it is non toxin to stick inside, a few pple did it.

[Ralliart_Ray]

Originally Posted by johnchor

hello guys

i have a problem and need some advice

i have a 422 tank with black oyama on back and bottom.
i wanted to remove the white sand as too much dirt and the pump/filter can't keep up.

can i stick white oyama inside the tank and make it white? it oyama toxic?

thanks

just lay white acrylic at the bottom of the tank. remember to measure correctly then go Dama Ubi to purchase, very affordable.

White oyama pasting will be a challenge , tank have to be without livestock/water, air-bubbles forming etc

for acrylic, just dump into the tank and align properly.

Originally Posted by Vitor

Btw it is non toxin to stick inside, a few pple did it.

will peel off...

Agree with bro humongous. Sure will peel off.

If use acrylic, ensure all gap seal up totally.. else will have dead spot and beware of parameter change...

Sent from my GT-N5120 using Tapatalk 4

[kent75]

Sticking the oyama inside the tank is a bad idea, stick it outside instead.

not possible to stick outside. the tank is so heavy.
i think i will try stick inside.

thanks guys

[sbtanpatrick]

Bro oyama paper is supposed to be sticked outside the tank...if you want to place inside tank use either acrylic or tiles...