Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Planted Tanks & Aquascaping Forum > Aquascapers Equipment, DIY and Hardware

Reply
 
Thread Tools Display Modes
Old 10-04-2011, 12:57 AM   #1
pine22
Guest
 
Posts: n/a
Default to improve water circulation

Hi there,

I have a 4x2x2 planted tank and would like to improve the water circulation.
At the same time co2 could be better distributed throughout the tank. Pls advise on which equip. I can use to achieve this. Thanks.
  Reply With Quote
Old 10-04-2011, 01:59 AM   #2
patson77
Guest
 
Posts: n/a
Default re

Hi there,
I am oso have a 422 and am very pleased with my water circulation.
I am using a atman 1200 canister which was connected to my CO2 diffuser, the outlet of the diffuser was located near the bottom of the tank and with the output pointing to the back wall of the tank, find that this creates a stronger current.
The inlet of the canister was situated near the surface of the tank cos it helps me to take in anything that flaots on the surface.
I added a SUNSUN 3000 wave maker to my tank and situate it near the center of the tank.
Hope of use to you.
  Reply With Quote
Old 23-04-2011, 12:07 AM   #3
pine22
Guest
 
Posts: n/a
Default

Hi, thanks for the advise. I have never tried facing the canister outlet to the back of the tank will will give it a try. Would it be better to place this outlet towards the base of the tank or towards the top. As for the wave maker, you locate it at the center of the tank and may I know you mean the breadth of the tank? I got a sunsun wavemaker too but got a wrong one which has 2 propellers and is super strong. So didn't use it.
  Reply With Quote
Old 01-05-2011, 12:54 PM   #4
aroc2003
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by pine22 View Post
Hi, thanks for the advise. I have never tried facing the canister outlet to the back of the tank will will give it a try. Would it be better to place this outlet towards the base of the tank or towards the top.it.
By facing the outlet of the canister facing back of the tank, it will reduce the full flowrate output that will cause the water in the tank to go in a circular motion. It will make the output like wave motion... Which is better for a planted tank...

Cheers...
  Reply With Quote
Old 06-06-2011, 07:10 PM   #5
Wazowski
Guest
 
Posts: n/a
Default

try a inline Co2 diffuser whereby the the Co2 gets diffuse into the water. but personally i like seeing the Co2 bubbles in action being diffused into the water
  Reply With Quote
Old 07-06-2011, 12:37 AM   #6
avant
Guest
 
Posts: n/a
Default

use a co2 reactor and have an additional pump to circulate the water
  Reply With Quote
Old 10-06-2011, 09:07 AM   #7
Wazowski
Guest
 
Posts: n/a
Default

check Evo's thread. he's using a wavemaker for circulation.
  Reply With Quote
Old 29-04-2014, 06:51 PM   #8
charmaine12
New Member
 
charmaine12's Avatar
 
Join Date: Apr 2014
Posts: 38
Default

i think install an internal power head
charmaine12 is offline   Reply With Quote
Old 30-04-2014, 01:11 AM   #9
Ong88

Prof SK Ong
 
Ong88's Avatar
 
Join Date: Jan 2009
Posts: 10,641
Default

Be wary of the wavemaker/internal power head increasing tank water temperature.
__________________



Just because it's a bad idea doesn't mean it won't be a good time.
Use imgur for your photos sharing
https://play.google.com/store/apps/d...m.imgur.mobile
Ong88 is offline   Reply With Quote
Old 30-04-2014, 08:46 AM   #10
armageddon
Senior Dragon
 
armageddon's Avatar
 
Join Date: Nov 2003
Posts: 4,204
Default

my 422 is having very good circulation. almost no dead spot except for those areas behind wood or stones. even there, can see the plants moving slight in the little waves of the plant. realised that lily pipes works in this case. i angled it 45degree towards the front. running a ehiem 2250 canister so everything seems well.

an external Co2 reactor will do good to the overall Co2 distribution. but realised if you have good water cirulation, just a good diffusor within tank will work as well.
armageddon is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 03:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)