Need help with Aqua OHF Filter Outflow

[reaperscreepers]

Hi guys... need some help from you guys!

So im using a 4ft Mr Aqua OHF with a total of 6 filter boxes, total is 2 levels...

its for my ranchu tank.. and i want to minimize the outflow as its creating turbulent which will stress my ranchu..

Is there ways to lower down the outflow besides changing the water pump/powerhead? FYI im using Atman 106 (around 3000litre/hour)

Will have another level of filter help to bring down the outflow?

Thanks a lot!

[reaperscreepers]

Anyone? heehee.

[TuNA]

Stacking higher will reduce the flowrate by a little. Another way is to add more elbows between your pump and ohf.

[Yuna]

Y not just change a pump...

[Heuer]

yup. change the pump is the easiest way to go.
if not, can lenghten the hose.

[yanki2]

will it help by extending the outlet to the bottom of the tank?

[zonkkie]

turn the outlet towards the wall?

[reaperscreepers]

thanks for the reply guys..

i turn the outlet towards wall, i realized the current is worse... ranchu keep floating all over the place.. lol..

Go C328 to get a clear PVC pipe the diameter of the discharge elbow and extend it to near the tank wall surface, it will enable the wter to cascade down via the wall and create less agitation for the tank incumbent

[reaperscreepers]

Originally Posted by Humongous

Go C328 to get a clear PVC pipe the diameter of the discharge elbow and extend it to near the tank wall surface, it will enable the wter to cascade down via the wall and create less agitation for the tank incumbent

i went there like 2 months ago and they said they dont have such PVC pipe... they say they dont have so big ones...