Sander Ozonizer & Pinpoint ORP monitor

Originally Posted by atom

Ooops! Actually suppose to get C50 but the guy at petmart said that the price difference between C50 n C100 only $30 n so ended with C100. Already got the ORP controller fm aqua-medic. My tank is only 522 n fw type. Intended to hook up to air-stone driven skimmer for the last stage as acitvated carbon is not recommended for aero setup. Will this do?

Thanks for your advice n sorry to post it here as not many people uses them in the FW section. In fact the equipment is still lying around until I can get sufficient info n courage to set it up.

Can PM me how much you bought your ORP controller?

Thx!

[soomin]

I used to run Hailea O3 overnight for my 5' aro tank, no problem to all live stock in the tank. I didn't use any controller, I started with 1 hour 1st, see nothing wrong with the aro, then slowly increase & after 1 week, i run overnight, water super clear on next day.
Anyway, this is my experience, try at your own risk.
I ever did a small experiment, I put a bull frog (those bigger one we used to fed aro) in a enclosed container, inject O3 for hours, nothing wrong (visually)to the frog after 4 - 5 hours. I personnally can smell the strong O3 escape from the container.

Originally Posted by soomin

I used to run Hailea O3 overnight for my 5' aro tank, no problem to all live stock in the tank. I didn't use any controller, I started with 1 hour 1st, see nothing wrong with the aro, then slowly increase & after 1 week, i run overnight, water super clear on next day.
Anyway, this is my experience, try at your own risk.
I ever did a small experiment, I put a bull frog (those bigger one we used to fed aro) in a enclosed container, inject O3 for hours, nothing wrong (visually)to the frog after 4 - 5 hours. I personnally can smell the strong O3 escape from the container.

Haha, must be commando frog!