Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Betta Forum > Articles, Resources & FAQs

Reply
 
Thread Tools Display Modes
Old 28-07-2008, 09:18 AM   #1
CharlieBrown
Guest
 
Posts: n/a
Default What is a Halfmoon?

I see a lot of fishes termed as Halfmoons and Halfmoon Plakats, but are they really Halfmoons? I think with a lot of new hobbyists, it's a good thing that we back to basics.

A Halfmoon ("HM"), as it's name refers to, requires a betta's caudal to form a nice 'D' shape (180 degree spread), so those that don't reach a 'D' are at best Superdeltas or SDs. To be even more exact, the outermost caudal edge must also be as long as the caudal fin, so as to form a 'D', otherwise the caudal has a rounded edge. Think of a protracter that you might have used in school.

This is the most basic criteria for a long-tail betta to be called a HM. But to be considered a good Halfmoon, there's more to it than just the caudal. But that's another story for the future.

What about HMPKs? For this, there are two main schools of thought. The first school of thought takes the same definition from long-tail bettas, that a 'D' caudal (180 degrees spread) is required. The second school of thought is that anything with 4-rays and above would be considered, whether or not the 'D' caudal is achieved. I leave it to your own choice on which school of thought you would like to follow.

Hope this helps our new friends on this forum. When they see a fish called "HM", they would at least think hard whether it qualifies. Not every fish called a HM, is one. And for very obvious reasons.

All the best in your betta hobby.
  Reply With Quote
Old 28-07-2008, 09:53 AM   #2
Happyjo
Arofanatic
 
Happyjo's Avatar
 
Join Date: May 2008
Posts: 303
Default

Thanks for the clarification! Was confused when some call their pk as hmpk when i don't see the 'D' shape... so it belongs to the second school of thought...
Happyjo is offline   Reply With Quote
Old 28-07-2008, 10:26 AM   #3
JadeIceGreen
Guest
 
Posts: n/a
Default

Thanks for the information Mod.
  Reply With Quote
Old 28-07-2008, 10:48 AM   #4
Leong68
Endangered Dragon
 
Leong68's Avatar
 
Join Date: Jun 2006
Posts: 16,811
Default

Thanks for the infor. Mod
Leong68 is offline   Reply With Quote
Old 28-07-2008, 11:08 AM   #5
Betta Crazy
Guest
 
Posts: n/a
Default

Thanks for sharing the info.
  Reply With Quote
Old 28-07-2008, 11:09 AM   #6
kian_john
Senior Dragon
 
kian_john's Avatar
 
Join Date: Feb 2008
Posts: 4,519
Default

Quote:
Originally Posted by CharlieBrown View Post
I see a lot of fishes termed as Halfmoons and Halfmoon Plakats, but are they really Halfmoons? I think with a lot of new hobbyists, it's a good thing that we back to basics.

A Halfmoon ("HM"), as it's name refers to, requires a betta's caudal to form a nice 'D' shape (180 degree spread), so those that don't reach a 'D' are at best Superdeltas or SDs. To be even more exact, the outermost caudal edge must also be as long as the caudal fin, so as to form a 'D', otherwise the caudal has a rounded edge. Think of a protracter that you might have used in school.

This is the most basic criteria for a long-tail betta to be called a HM. But to be considered a good Halfmoon, there's more to it than just the caudal. But that's another story for the future.

What about HMPKs? For this, there are two main schools of thought. The first school of thought takes the same definition from long-tail bettas, that a 'D' caudal (180 degrees spread) is required. The second school of thought is that anything with 4-rays and above would be considered, whether or not the 'D' caudal is achieved. I leave it to your own choice on which school of thought you would like to follow.

Hope this helps our new friends on this forum. When they see a fish called "HM", they would at least think hard whether it qualifies. Not every fish called a HM, is one. And for very obvious reasons.

All the best in your betta hobby.
but if the parent both are HM and the out come if haven reach a HM we call it SDs?are you trying to say that 804 HM are SDs?==> http://www.arofanatics.com/forums/sh...d.php?t=329466 ? mind explain?
kian_john is offline   Reply With Quote
Old 28-07-2008, 11:43 AM   #7
YiDaLi
Guest
 
Posts: n/a
Default

arh~ no i noe min must see 4 rays... tks mod!
  Reply With Quote
Old 28-07-2008, 12:02 PM   #8
CharlieBrown
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by kian_john View Post
but if the parent both are HM and the out come if haven reach a HM we call it SDs?are you trying to say that 804 HM are SDs?==> http://www.arofanatics.com/forums/sh...d.php?t=329466 ? mind explain?
For some reason, I knew this question would be asked.

To state this up front, I wrote this without reference to any thread. I wrote it even before I opened your referenced thread. My purpose is to share with everyone, especially new hobbyists, what a HM should be. The definition is used for mature fish, not really for young fish.

For young fish, I would not term them HMs if they cannot satisfy the definition I gave. However, it does not mean that they cannot become HMs at some point in the future. Even for some young fish, they can already satisfy that definition.

HM is not controlled by a single gene, thus a spawn of HM parents will give you a higher percentage of HMs, but not all offspring will become HMs. If they mature into HMs, then well and fine. But if they do not, then you can call them anything but HMs.

For experienced hobbyists, they will definitely yield greater number of HMs because they are able to groom the young fish well. For less experienced, even if the young fish is HM, when older these may not be HMs.

That's why HMs are so challenging. Hope this helps.
  Reply With Quote
Old 28-07-2008, 12:50 PM   #9
nismo83
Guest
 
Posts: n/a
Default

u the know answer liao ma... so do i .. and so do some of the forumer here in af... but as usual... black dark u shd know...

but i have 1 qns... OHM need to have straight or sharp edge?
  Reply With Quote
Old 28-07-2008, 12:56 PM   #10
nismo83
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by kian_john View Post
but if the parent both are HM and the out come if haven reach a HM we call it SDs?are you trying to say that 804 HM are SDs?==> http://www.arofanatics.com/forums/sh...d.php?t=329466 ? mind explain?
those are young fish...they are still growing... only when 3mths then can confirm...
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 09:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)