Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Planted Tanks & Aquascaping Forum > Aquascapers Equipment, DIY and Hardware

Reply
 
Thread Tools Display Modes
Old 20-03-2006, 01:23 AM   #31
xtrekker
Guest
 
Posts: n/a
Default

Hi Arolee999 , care to share the specs for your setup ?

Tank Size :
Tank Volume :
Ambient Temperature :
PSU :
Heatsink Fan specs :
TEM (VxI) : Watt
TEM (Qc max ) :

cheers
xtrekker
  Reply With Quote
Old 20-03-2006, 11:58 AM   #32
Arolee999
Dragon
 
Arolee999's Avatar
 
Join Date: Jul 2004
Posts: 965
Default

Quote:
Originally Posted by xtrekker
Hi Arolee999 , care to share the specs for your setup ?

Tank Size :
Tank Volume :
Ambient Temperature :
PSU :
Heatsink Fan specs :
TEM (VxI) : Watt
TEM (Qc max ) :

cheers
xtrekker
Hi xtrekker
Here is the spec:
Tank Size : 12.5inch x 9inch x 9inch
Tank Volume : 14.74 liter
Ambient Temperature : 27.9C
PSU : ATX12V 8A
Heatsink Fan specs :12V 0.4A
TEM (VxI) : 72Watt 6A (Which shopkeeper tell me)
TEM (Qc max ) : Not sure...

Cheers!
Arolee999 is offline   Reply With Quote
Old 20-03-2006, 02:48 PM   #33
xtrekker
Guest
 
Posts: n/a
Default

Thanks Arolee999. This would be good infomation for the rest of the forumers who wants to do something like your setup.

cheers
xtrekker
  Reply With Quote
Old 20-03-2006, 10:20 PM   #34
Bezz
Guest
 
Posts: n/a
Default

I was fooling around with TEM chilling for my nano marine tank and I built a



First run doesn't seem promising. I'm making changes to the design and trying again.

The problem with marine tanks is cannot use aluminium heatsink as conductor So not alot of ways to transfer the coldness from the peltier to the water.
  Reply With Quote
Old 24-03-2006, 05:05 AM   #35
5121
Guest
 
Posts: n/a
Default

Sorry ~ abit electronic idiot.
Can ermmm Say the steps in details ?

Step 1 ....
Step 2 ....



Things i need.
-Heat Sink
-Cold Plate
-TEM
-PSU or 12v step down adapter

Is that all ?
must i buy thermal grease ?
  Reply With Quote
Old 26-03-2006, 02:01 AM   #36
xtrekker
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by 5121
Sorry ~ abit electronic idiot.
Can ermmm Say the steps in details ?

Step 1 ....
Step 2 ....



Things i need.
-Heat Sink
-Cold Plate
-TEM
-PSU or 12v step down adapter

Is that all ?
must i buy thermal grease ?
step 1 : Read up and understand what is TEM. Then calculated the heatload of your tank. from the graph in my first posting.

step 2 : Look at other's design. If you want perharps you can come up with your own design. Get the parts as you mention above and assemble your unit.

step 3 : ......


thermal grease is a must . Its a help to conduct the heat from the TEM to the heat sink.
  Reply With Quote
Old 26-03-2006, 11:24 PM   #37
wfc31
Guest
 
Posts: n/a
Default

xtrekker & Arolee999 ,
Bros, can u tell me what type of heatsink u use for the diy chiller to dissipate the TEM heat? From ur diy pictures, it doesn't look like normal aluminium heatsink, where to buy? Price?
Thanks...
  Reply With Quote
Old 27-03-2006, 12:40 AM   #38
xtrekker
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by wfc31
xtrekker & Arolee999 ,
Bros, can u tell me what type of heatsink u use for the diy chiller to dissipate the TEM heat? From ur diy pictures, it doesn't look like normal aluminium heatsink, where to buy? Price?
Thanks...
My heatsink is from foxcon .. ITs a heatsink for server. This type is heatsink is know as "Forced Convection" because it uses a fan to increase convection cooling . Got it from level 3 at SLT. First shop on your right when you comeup from the escalator. about $12 -$15 . try to bargain .

cheers
xtrekker
  Reply With Quote
Old 27-03-2006, 06:53 AM   #39
wfc31
Guest
 
Posts: n/a
Default

foxcon is the shop name or the heatsink brand?
level 3 is mean the most top floor rite? better can know the shop name of shop lot.
i feel that my aluminium heatsink not good enough to conduct the heat from the TEM, so the cold plate no cool enough because the TEM delta temp is 68C, if the cooler the heat side, then the cooler the cold plate, rite?
  Reply With Quote
Old 27-03-2006, 12:16 PM   #40
Arolee999
Dragon
 
Arolee999's Avatar
 
Join Date: Jul 2004
Posts: 965
Default

Quote:
Originally Posted by wfc31
xtrekker & Arolee999 ,
Bros, can u tell me what type of heatsink u use for the diy chiller to dissipate the TEM heat? From ur diy pictures, it doesn't look like normal aluminium heatsink, where to buy? Price?
Thanks...
Hi,
I use the normal aluminium heatsink for the cool side.
The other side heatsink i got it from SLT level 3. I cannot remember which shop but the shop selling 2nd hand electronic parts. i found it from a junk box of heatsink.
The heatsink i bought it at S$10 including fan. Cool plate at S$4.50. TEM at S$19.00. Thermal grease S$1.00.

I bought all these items from different shop in SLT. Just spend you time looking around you may able to find the parts that you want.
Arolee999 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)