Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Planted Tanks & Aquascaping Forum > Aquascapers Equipment, DIY and Hardware

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-05-2011, 03:51 AM   #1
qngwn
Arofanatic
 
qngwn's Avatar
 
Join Date: Jan 2009
Posts: 70
Red face DIY Inline CO2 Diffuser

Hi all,

Just building on the idea og an inline CO2 diffuser, not reactor.
http://www.greenleafaquariums.com/co...-diffuser.html

I kind of DIY-ed something like that.. but of course not in the tank.
Perhaps you guys would like to take a look at the pictures. i rather not type thousands of words..

Basically i used:
acrylic tube of 2 inches - $0.50
air stone - $0.30
check valve - $1.50
leftover plastic tubing for CO2 of 10cm - Y618 sells $0.20 for 1m.
glue gun - silicon will do as well, as long as water does not come out

Total cost -estimated $2.50

although i know that using a CO2 atomizer will be much better, but would not know if this thing would work out.. so decided to spend 30cents instead of $3.

I placed this DIY part on the inline to my canister filter, similiar to that of the actual one in the link shown above, just that mine is external, and costs less than 1/10 of the other's price.

Turned on my solenoid, and watch the CO2 bubbles coming out from the airstone, going against the flow of the water, and getting sucked into the canister.

Assuming that the bubbles have to go through all the many layers of filter and rings in the canister, get stirred by the impeller and out together with the flow of the water into my rainbar, i must say that 95% of the CO2 were dissolved. of course with the occasional fine bubbles of CO2 coming out from my rainbars.

I suggest those who are interested to try this out, to use this only if your set up needs low bubble per sec counts as i doubt that alot of co2 would be dissolved by the time the water goes back into the tank.

of course, please comment and advise! my first DIY here though..
(maybe i'll pull the airstone out and change to an atomizer.. but lazy to unplug everything)

Pictures shown below.


drilled a hole, just big enough to squeeze the plastic tubing through.



Very fine bubbles going into the canister.. iphone camera cant capture!
qngwn is offline   Reply With Quote
 

Tags
co2, diffuser, diy, inline, reactor


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)