![]() |
|
![]() |
#21 |
Guest
Posts: n/a
|
![]()
Well I wouldn't dare cause the TEM's electrical insulator is creamic based ,they are very brittle .The thermal grease would harden /dryup after its get heated by the TEM .Surface tension between the two surface is very strong. the best method i can think of is to slide it out.
cheers xtrekker |
![]() |
![]() |
#22 | |
Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2004
Posts: 965
|
![]() Quote:
![]() May i know how long the peltier can last if i turn it ON for 24hrs everyday? I already turn it ON yesterday 8pm until now....Water temperature now 22.4C. |
|
![]() |
![]() |
![]() |
#23 | |
Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2004
Posts: 965
|
![]() Quote:
![]() ![]() |
|
![]() |
![]() |
![]() |
#24 | |
Guest
Posts: n/a
|
![]()
IC ,maybe i didnot look closely the last time i was there . He owner got a hong kong accent one right ?
most TEM or peltier device has a MTBF of 50000hrs which works out to be about 2083 days or 297 weeks or 5 years if turn on 24hrs everyday. cheers xtrekker Quote:
|
|
![]() |
![]() |
#25 | |
Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2004
Posts: 965
|
![]() Quote:
Maybe try to buy the 8A peltier to setup another 2 feet tank..... ![]() |
|
![]() |
![]() |
![]() |
#26 |
Guest
Posts: n/a
|
![]()
Can someone teach me how to wire the TEC module to the CPU PSU? The CPU PSU connector got 4 wire RBBY (Red Black Black Yellow) while the TEC Module got Red and Black (DC). Sorry complete electronics idiot here
|
![]() |
![]() |
#27 | |
Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2004
Posts: 965
|
![]() Quote:
Make sure your CPU PSU able to supply enough Amp to your TEM. Else it might not able to bring down your water to your desired temp. ![]() |
|
![]() |
![]() |
![]() |
#28 | |
Guest
Posts: n/a
|
![]() Quote:
And how do you override the CPU PSU to turn on? As I understand you need to "short" some cable to turn activate the CPU PSU right? Last edited by revolushun; 19-03-2006 at 04:08 PM. |
|
![]() |
![]() |
#29 | |
Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2004
Posts: 965
|
![]() Quote:
The CPU PSU DC connector :Yellow(+12VDC), Black (Ground), Red (+5VDC). Override the CPU PSU, you better check with your PSU brand and which pins to short. That depends on individual PSU maker. Last edited by Arolee999; 19-03-2006 at 04:19 PM. |
|
![]() |
![]() |
![]() |
#30 | |
Guest
Posts: n/a
|
![]() Quote:
Connect REMOTE POWER ON Pin 14 (Green) to GROUND pin 15 (Black). This will Put your PSU to "always on" mode. If your TEM is drawing high current .. its best to bundle ALL the wires together instead of using a single wire. for example when 12V is required , you can bundle all the yellow wires together so that the current / load would be "share out " among the wires. Do the same for the Black wires (ground). You might want to refer to the link below for the PSU ATX connector's pinout www.technick.net/public/code/cp_dpage.php?aiocp_dp=pinconmth_atx_power cheers xtrekker |
|
![]() |
![]() |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|