Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Planted Tanks & Aquascaping Forum > Aquascapers Equipment, DIY and Hardware

Reply
 
Thread Tools Display Modes
Old 30-03-2006, 08:44 PM   #51
Kohaku
Dragon
 
Kohaku's Avatar
 
Join Date: May 2002
Posts: 2,736
Default

Quote:
Originally Posted by bokob1uR
Quote:
Originally Posted by Arolee999
Hi,
I use the normal aluminium heatsink for the cool side.
The other side heatsink i got it from SLT level 3. I cannot remember which shop but the shop selling 2nd hand electronic parts. i found it from a junk box of heatsink.
The heatsink i bought it at S$10 including fan. Cool plate at S$4.50. TEM at S$19.00. Thermal grease S$1.00.

I bought all these items from different shop in SLT. Just spend you time looking around you may able to find the parts that you want.
hi i tried asking abt the peltier.... ard in SLT ... but most of the shop dun have it... do u might give me the address or unit no. of the shop?
Quote:
Originally Posted by wfc31
the shop is at basement, lot number is B1-25, go and ask for 'peltier', don say TEM or TEC, the boss will give u back a "??" answer. They got 8A and 6A module, so, choose urself which one suit u.
I tried asking around all the shops in sim lim tower from level 3 to basement(B1-25) for the items and they only tell me they have normal black heatsink. In the end I got 2 fans and now looking for the heatsink to add to the fan
The closest I got to finding the peltier was at level 3, Suntronics. The shape and colour look the same but the sink is for a different size use and it is more expensive. Other shops like Space Electronics, BellSystem, etc, did not get anything

Would the brother, who got the peltier sink, care to tell us the unit no. he got it from?
Kohaku is offline   Reply With Quote
Old 30-03-2006, 10:14 PM   #52
xtrekker
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Arolee999
Going to start your next project soon??
heheh ....ya lor . Trying to build a temperature controller for my TEM.
  Reply With Quote
Old 30-03-2006, 10:19 PM   #53
xtrekker
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by wfc31
If like that then no point add another fan lo, as i am thinking fan cooling by evapouration, since already reach 27C, if more evapouration then can bring down further, so it is wrong theory.
Blowing a fan when using a chiller is a double edge sword. It can help to cool down you tank or heat it up .

Cool down your tank by blowing the heat from your lamp away .

Heat it up by blowing warmer room temperature to your tank.

thats really crappy temp. you have to minimise heat in to your tank. I.e insulate your piping ,cold side of your chiller.

how hot is your heatsink at the moment ? warm air is been blown out ? or just slightly cool air ?

cheers
xtrekker
  Reply With Quote
Old 30-03-2006, 10:26 PM   #54
xtrekker
Guest
 
Posts: n/a
Default

[QUOTE=Kohaku]I tried asking around all the shops in sim lim tower from level 3 to basement(B1-25) for the items and they only tell me they have normal black heatsink. In the end I got 2 fans and now looking for the heatsink to add to the fan
The closest I got to finding the peltier was at level 3, Suntronics. The shape and colour look the same but the sink is for a different size use and it is more expensive. Other shops like Space Electronics, BellSystem, etc, did not get anything

Suntronic got the giant ones you mention .. but only 8 fins i really doubt its cooling capacity comes in 12in or 24inches .The rest dun have aredi . Perharps you can try your friendly car audio specialist or some 2nd hand audio shops should have some scrap Power Ampilifiers heatsink lying around..
  Reply With Quote
Old 31-03-2006, 10:58 AM   #55
wfc31
Guest
 
Posts: n/a
Default

[Blowing a fan when using a chiller is a double edge sword. It can help to cool down you tank or heat it up .
Cool down your tank by blowing the heat from your lamp away .
Heat it up by blowing warmer room temperature to your tank.]

--> I try to add a fan blowing the water surface, monitor the different, will update here the result.

[thats really crappy temp. you have to minimise heat in to your tank. I.e insulate your piping ,cold side of your chiller.]

--> I have insulated 3 sides of my tank and canister filter body with aircond heat insulator sheet, then the piping also insulated with aircond pipe insulator.

[how hot is your heatsink at the moment ? warm air is been blown out ? or just slightly cool air ?]

--> didnt scan the heat side temp, but can feel better than last time as now i'm using full copper 67 fins heat sink, http://www.thermaltake.com/product/c...1/cl-p0001.asp
can feel the cold side cooler than before, but still cant get the temp down to 24C, a sad thing
  Reply With Quote
Old 31-03-2006, 11:59 AM   #56
Arolee999
Dragon
 
Arolee999's Avatar
 
Join Date: Jul 2004
Posts: 965
Default

Quote:
Originally Posted by xtrekker
heheh ....ya lor . Trying to build a temperature controller for my TEM.
Ha....i do the same.....i already install the temperature controller. Will update the picture if got time.
Now controlling at 25 degree.
Arolee999 is offline   Reply With Quote
Old 31-03-2006, 03:15 PM   #57
xtrekker
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Arolee999
Ha....i do the same.....i already install the temperature controller. Will update the picture if got time.
Now controlling at 25 degree.
Cool.. Actually aredi fix up the circuit on breadboard aredi. miss out one component. have to go down there again....

cheers
xtrekker.
  Reply With Quote
Old 31-03-2006, 03:18 PM   #58
xtrekker
Guest
 
Posts: n/a
Default

>>>can feel the cold side cooler than before, but still cant get the temp down to 24C, a sad thing

you mean the cold plate feels is cooler in the tank ? if thats the case maybe your water circulation is not good enuff to transfer the heat from your tank to your cold plate.

cheers
xtrekker
  Reply With Quote
Old 31-03-2006, 07:09 PM   #59
Arolee999
Dragon
 
Arolee999's Avatar
 
Join Date: Jul 2004
Posts: 965
Default

Quote:
Originally Posted by xtrekker
Cool.. Actually aredi fix up the circuit on breadboard aredi. miss out one component. have to go down there again....

cheers
xtrekker.
Can show some picture of your temp controller??
And what thermocouple u use?
Arolee999 is offline   Reply With Quote
Old 01-04-2006, 11:55 AM   #60
bokob1uR
Dragon
 
bokob1uR's Avatar
 
Join Date: May 2002
Posts: 1,126
Default

Quote:
Originally Posted by Arolee999
Can show some picture of your temp controller??
And what thermocouple u use?

may i noe the size of the peltier u guys using ,,, i brought a 8A 40x40 one...dunnoe whether it actually work anot lol..
bokob1uR is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 06:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)