Figo's Nisai/CBR update - Dec 2009

[westiee]

Originally Posted by chris

His hose is so small of course take long time....

halo...my fireman hose ok....

Originally Posted by westiee

halo...my fireman hose ok....

hahahaha...more like air tubing size....

[nutx]

Originally Posted by noidea

Not that one. Those rubber type but now it cost more and look stronger than those $1 to $2 type.

I have thought of it but my pond water I don't change water so often and also the strength of water flow into the fgt, I think the TVR tail will collapse.

Bro....use a air hose or slightly bigger size one, and link to one of your pump. this will control the inflow, and you can have constant overflow out of the fgt.

Your pond water should be good water with everything zero and NO3 should be around 50, which is acceptable to TVR....

[nutx]

Just realised a few Bros upz my reputation points....thanks..

[noidea]

Originally Posted by figo007

Post some picture and share share can?

As requested, here is the photo of the suction tube. I tested it just now, the suction is much better than those cheap type.

[noidea]

Originally Posted by nutx

Bro....use a air hose or slightly bigger size one, and link to one of your pump. this will control the inflow, and you can have constant overflow out of the fgt.

Your pond water should be good water with everything zero and NO3 should be around 50, which is acceptable to TVR....

Seem like a lot of modification to be done.

[figo007]

Originally Posted by noidea

As requested, here is the photo of the suction tube. I tested it just now, the suction is much better than those cheap type.

Hi William,

Thanks for the picture. I got one bought from a pet shop beside the NTUC at Serangoon North. Need to use 2x Medium size battery to operate but I find that eat up too much of battery so just leave it inside the cabinet after used for about 2 weeks....show the picture later...