Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > AroReefers > Equipment/DIY discussion

Reply
 
Thread Tools Display Modes
Old 20-04-2008, 10:16 PM   #1
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Arrow DIY LED lighting

It has been very long since I did any DIY projects. Now for my DIY Aquarium lighting experiment, some Luxeon V and CREE XR-E. They are meant to replace my 2x250W MH. Is it possible? I dont know yet, thats why I started this experiment.

I ordered 8pcs of the Luxeon V, 5W royal blues, 450nm. Each Luxeon V is actually 4 leds in one package, if you look closely you will be able to find 4 dies inside the lens



Modified array of 12pcs of CREE XR-E 1.25W 5000K

BarraCuda™ is offline   Reply With Quote
Old 21-04-2008, 01:18 AM   #2
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default



Note that the Luxeon royal blue peaks at 450nm useful for photosynthesis but no glow for corals . Actinic peaks at 420nm, shorter wavelength for glow but not available for photosynthesis
BarraCuda™ is offline   Reply With Quote
Old 21-04-2008, 01:19 AM   #3
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default



Spectrum chart for the CREE XR-E, 5000K was chosen because of the increased yellow/red spectrum needed for photosynthesis. However I tried keeping some purple acros under pure 15watts of CREE XR-E 5000K and failed, the acros bleached and recede slowly over 3 weeks.

I have now increased to 40watts of royal blue and 15watts of white, only 1 side of the tank is lit due to the costs of luxeons USD$23+ each!
BarraCuda™ is offline   Reply With Quote
Old 22-04-2008, 11:32 PM   #4
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

These 8 pieces of Luxeon V are driven by 2 of these tiny Luxdrive LED Drivers at 700mA

BarraCuda™ is offline   Reply With Quote
Old 27-04-2008, 12:00 AM   #5
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

The LEDs are connected to a 4'x1' 3mm aluminum sheet as a heat sink. Effectively, only half of the aluminum is heated. The other side is room temperature.

I have taken temperature readings directly on the heat sink above the LEDs, its around 43-47C, well below the thermal design requirements

BarraCuda™ is offline   Reply With Quote
Old 05-05-2008, 10:28 PM   #6
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Received more Luxeon K2, still waiting for the CREE XR-E Q5s and 410nm actinic LEDs . These K2 will be driven at 1000mA or 1500mA once the 1500mA drivers are available.

BarraCuda™ is offline   Reply With Quote
Old 12-05-2008, 10:35 PM   #7
Hansreef
Guest
 
Posts: n/a
Default Wow very pro leh

Hi,
Look cool, this DIY LED light. Good for adding moonlight to marine tank.
  Reply With Quote
Old 14-05-2008, 12:29 AM   #8
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Quote:
Originally Posted by Hansreef View Post
Hi,
Look cool, this DIY LED light. Good for adding moonlight to marine tank.
If you use these LEDs for moonlight then its way overpowered already. I'm able to keep some acros and clams under them!
BarraCuda™ is offline   Reply With Quote
Old 14-05-2008, 11:05 AM   #9
xersion
Dragon
 
xersion's Avatar
 
Join Date: Apr 2006
Posts: 707
Default

is the led complete? how much it cost total? and how much heat is produced compare to MH..
xersion is offline   Reply With Quote
Old 14-05-2008, 12:58 PM   #10
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Quote:
Originally Posted by xersion View Post
is the led complete? how much it cost total? and how much heat is produced compare to MH..
Its only particially completed so I did not show any pics, cost wise also not confirmed as I'm still adding and modifying the arrays.

As for heat, there is almost no heat input from the LEDs. I once ran the LEDs with 1 tunze wavebox with no chiller for about 12hours when I shut the main pump down due to leaks. The water temperature raised from 25C to 26.8C when I came back at night, I'm actually once pleased that the wavebox operates relatively cool!
BarraCuda™ is offline   Reply With Quote
Reply

Tags
coral, diy, led, light


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 02:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)