View Single Post
Old 15-10-2013, 05:06 PM   #37
jenson
Arofanatic
 
jenson's Avatar
 
Join Date: Aug 2013
Posts: 124
Default

Quote:
Originally Posted by Humongous View Post
Pardon my lacking in the command of english....

conclusion,

Lower Better

Aquanic 3000 (5x2x1.5)
Headloss - Mid high
Noise - Mid (Humming)
Vibration - High
Water Temp 28.5

Dyna 3000 (5x2x2)
Headloss - Mid
Noise - Low
Vibration - Mid High
Water Temp 27.3

Eh 1260 (5x2x1.5)
Headloss - Minimal
Noise - Low
Vibration - Low
Water Temp 29.4

Eh 1262 (5x2x2)
Headloss - Minimal
Noise - Low
Vibration - Low
Water Temp 29.7
Thanks for the clarifications, bro. So in conclusion Eheim is still the best choice?

Mo recently just purchased a Rio Hyperflow 14HF.

Measured by eyes based on tank height my tank set with sump is about 5 ft high @_@. So it should be about 1.5 metres. The specs on Rio pump box indicated a headloss at different height of the tank at 1.8m, the flow rate of that pump is around 2050L/Hr. If I'm not wrong the flow rate for this model should be around 3000++ L/Hr? Maybe some bros here can enlightened me.

So far I have an eheim flexible hose at half a metre long connected to piping at sump there in a swirled U or S shape. And it bend out to the cabinet and bent up again to the main tank slanting around 60 degrees up.

The water flow is still quite strong. I wonder how bro Humongous measures the flow rate of each pump reaching certain height?

Néed to be enlightened to master this skill
jenson is offline   Reply With Quote