Arofanatics Fish Talk Forums - View Single Post - DIY Wavebox, Guide to building your very own DIY Wavebox

BarraCuda™ · 18-08-2006, 05:09 PM

In this thread, I will share with you guys how to construct your own DIY wavebox. First of all, you will need to own the following components before starting this project.

You will need a controllable tunze turbelle stream pump either 6000, 6100 or 6200. The flowrate does not matter as 6000 is good enough for wavemaking.

You will also need a 6080.50 magnet holder. This magnet holder will be able to support the wavebox up to 15mm glass thickness.

Soldering stuff (not really necessary but good to have)
Breadboard (For those that cant solder)

First of all, I provide all these information FOC. Please do not use this information and try to sell it. Its meant to be shared FOC

18-08-2006, 05:09 PM	#1
BarraCuda™ SiaoGu Gives You Wings Join Date: Jul 2001 Posts: 4,169	DIY Wavebox, Guide to building your very own DIY Wavebox In this thread, I will share with you guys how to construct your own DIY wavebox. First of all, you will need to own the following components before starting this project. You will need a controllable tunze turbelle stream pump either 6000, 6100 or 6200. The flowrate does not matter as 6000 is good enough for wavemaking. You will also need a 6080.50 magnet holder. This magnet holder will be able to support the wavebox up to 15mm glass thickness. Soldering stuff (not really necessary but good to have) Breadboard (For those that cant solder) First of all, I provide all these information FOC. Please do not use this information and try to sell it. Its meant to be shared FOC