Quote:
|
Originally Posted by Arolee999
There is no wire for heatsink. Do you mean heatsink fan? You need to confirm your fan required voltage.
The CPU PSU DC connector :Yellow(+12VDC), Black (Ground), Red (+5VDC).
Override the CPU PSU, you better check with your PSU brand and which pins to short. That depends on individual PSU maker.
|
Connect REMOTE POWER ON Pin 14 (Green) to GROUND pin 15 (Black). This will Put your PSU to "always on" mode.
If your TEM is drawing high current .. its best to bundle ALL the wires together instead of using a single wire.
for example when 12V is required , you can bundle all the yellow wires together so that the current / load would be "share out " among the wires.
Do the same for the Black wires (ground).
You might want to refer to the link below for the PSU ATX connector's pinout
www.technick.net/public/code/cp_dpage.php?aiocp_dp=pinconmth_atx_power
cheers
xtrekker